你好。
Hello.

在本教程中，我想向您展示如何使用逆指令，为 Mr. 插入开发人员。
In this tutorial, I want to show you how can we use inverse instruction, interjects developer for the Mr.

哈尔西主教的。
Bishop Halsey's.

我将在这里插入一个链接。
I will insert a link to here.

现在我将向您展示一个使用每个逆的示例，首先，让我们从 Aim 200 开始，好吧，这只是布局和输出的示例，例如，为什么？
And now I will show to you an example to use each of the inverse and firstly, let's start with the Aim 200, OK, and this is just an example of the lay and out, for example, why?

5 和 10 到这里我将再次插入一条线和 LTM 200 到这里。
Five and 10 into here I will insert a line and LTM 200 again into here.

也许我们可以在指令之前只使用一个指令来联系。
Maybe we can use just one instruction a contact before the instruction.

我将插入垂直线并在这里我会说出为什么？
I will insert the vertical line and into here I will say out why?

六。
Six.

好的，现在您将看到我们如何在能流线上使用逆指令？
OK, and now you will see how can we use inverse instruction on line on the power flow line?

我只是写了一个与我羡慕的捷径相反的东西。
I'm just writing an inverse than this shortcut I envy.

我会说，好吧，那么当我 200 这个活跃时，为什么 5 感觉有点活跃，但 6 不会活跃。
And I will say, OK, then when I 200 this active why five feels a bit active, but y six is not going to be active.

这是倒置，出现什么？
This is inverting, emerging of what?

根据输入反转输出条件。
Inverting of the output condition according to input.

这是关闭的，然后这就是所有的了。
This is off, then this is all this is on.

这件事已经完成了。
This is of done.

咱们来说说吧。
Let's say it.

它是否按照我所说的正确运行，策略和主程序正确并执行？
Is it running what I say correctly, right to policy and the main program and execute?

现在我们正在写信给LC，我会说，好的，快完成了。
And now we are writing to the LC now and I will say, OK, almost finished.

然后我会说是的，它已完成并关闭它并进入监视模式。
And then I will say yes, it's completed and close it and go to monitor mode.

现在我们该怎么办？
And now what will we do?

我会做，呃，什么都不做，因为你会直接看到 200 是因为这个原因，y 6 处于活动状态，y 5 未激活，并且 200 现在将处于活动状态切换力。
I will do, uh, nothing, because directly you will see 200 is of because of that, y six is active, y five is not activated and 200 is going to be active now toggle force.

然后你就会明白为什么五个是活跃的，因为不是直接反相，功率流和输出是打开的。
And then you will see why five is active because not inverting directly, the power flow and output is on.

但现在你会看到，由于反向指令，然后 y 6 被反转并且输入打开。
But now you will see because of the inverse instruction, then y six is inverted and the input is on.

但输出是我们如何将逆指令用于策略？
But the output is of this is how can we use inverse instruction into policy?

如果你根据输入做出相反的条件，通常我们可以认为输入输出是打开的，输入是输出是关闭的，但现在它正在反转这个条件。
And if you make an opposite condition according to input, and normally we can think it like that input output is on input is of output is off, but now it is inverting this condition.

这就是本教程的全部内容。
That's all for this tutorial.

我到这里就结束了。
I am finished here.

额外音频见。
See you into an extra audio.